Pololu Ball Caster with 1/2″ Plastic Ball
This light ball caster uses a 1/2″ diameter plastic ball. The height of the assembled kit ranges from 0.5″ to 0.8″.
![]() |
Pololu ball caster with 1/2" plastic ball with included hardware. |
---|
Overview
This ball caster kit includes a black ABS housing, a 1/2″ diameter plastic ball, two spacers (1/16″ and 1/8″ thick), and two #2 screw sets. The total height of the ball caster, 0.53″, can be increased to about 0.7″ using the included spacers. The two included #2 screws can be used to mount the ball caster to your chassis (the distance between the screw holes is 0.58″).
Note that our ball casters are designed for small robots; they are not intended to bear more than a few pounds. With more weight than this, friction between the ball and the housing will probably keep it from rolling well.
|
|
Comparison of Pololu ball casters
![]() |
Pololu ball casters with plastic and metal balls. Ball diameter from left to right: 1″, 3/4″, 1/2″, and 3/8″. |
---|
Dimensions
Ball diameter: | 0.5 in |
---|---|
Weight: | 2 g |
General specifications
Ball material: | plastic |
---|
N/A |