770RPM Metal Gearmotor 25Dx48L mm MP 12V with 48 CPR Encoder

LKR 7,250.00
In stock
SKU
3238

This gearmotor consists of a medium-power, 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 464.64 counts per revolution of the gearbox’s output shaft. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox.


Key specs at 12 V: 770 RPM and 200 mA free-run, 22 oz-in (1.6 kg-cm) and 2.1 A stall.

These cylindrical brushed DC gearmotors are available in a wide range of gear ratios and with five different motors (two power levels of 6V motors and three power levels of 12V motors). The gearmotors all have the same 25 mm diameter case and 4 mm diameter gearbox output shaft, so it is generally easy to swap one version for another if your design requirements change (though the length of the gearbox tends to increase with the gear ratio). All versions are also available with an integrated 48 CPR quadrature encoder on the motor shaft. Please see the 25D metal gearmotor comparison table for detailed specifications of all our 25D metal gearmotors. This dynamically-sortable table can help you find the gearmotor that offers the best blend of speed, torque, and current-draw for your particular application.

Dimensions

Size: 25D x 60L mm
Weight: 95 g
Shaft diameter: 4 mm

General specifications

Gear ratio: 4.4:1
No-load speed @ 12V: 1700 rpm
No-load current @ 12V: 200 mA
Stall current @ 12V: 2100 mA
Stall torque @ 12V: 11 oz·in
No-load speed @ 6V: 850 rpm1
Stall current @ 6V: 1050 mA1
Stall torque @ 6V: 5 oz·in1
Lead length: 8 in2
Motor type: 2.1A stall @ 12V (MP 12V)
Encoders?: Y
More Information
N/A
Write Your Own Review
You're reviewing:770RPM Metal Gearmotor 25Dx48L mm MP 12V with 48 CPR Encoder
Your Rating